Pro Series

Full-featured, high-output control

PropX Pro

PropX Pro

Full-featured prop controller for complex animatronic builds

PropX Motor

PropX Motor

All the power of the Pro, built for DC motor-driven props

Core Series

Essential control for any build

PropX Core

Essential prop control without the complexity

PropX Outdoor

PropX Outdoor

All-weather prop control in a rugged IP67-rated enclosure

Mini & Open Source

Compact and community-driven

PropX Mini

PropX Mini

Tiny controller, serious results

PropX Tinker

PropX Tinker

Open-source prop controller — build it yourself

All PropX controllers include Wi-Fi, cloud dashboard, and onboard audio.

Compare all products →

PropX Documentation

PropX-Pro

The full-featured show and prop controller: 8 outputs, 2 trigger inputs, stereo sound, DMX stage lighting, and PropX Mesh.

Set up

Quick StartWire a prop to your PropX-Pro, power it up, pair with the app, and fire your first output — nine steps, about ten minutes.Setup guideThe complete PropX-Pro walkthrough: mount, wire outputs and sensors, connect speakers and LED strips, set up DMX or PropX Mesh, and load your sounds.Device tourThe labeled map of the PropX-Pro: power, 8 output pairs, trigger inputs, speaker terminals, PROG ports, LED strip port, status lights, and buttons.

Use

Pair your controller with the appAdd a PropX Pro, Motor, Outdoor, or Mini to the PropX Control Center app over Bluetooth — put it in pairing mode with the Record and Output buttons, then Scan and Add. No PIN.Connect your controller to WiFiConnect a PropX Pro, Motor, Outdoor, or Mini to your WiFi network from the app — plus the 5-minute setup-network fallback when Bluetooth can't reach it.Cloud remote control (coming soon)Cloud remote monitoring and triggering for PropX Pro, Motor, Outdoor, and Mini is coming soon. Today, control your controller over Bluetooth with the PropX Control Center app.Update your controller's firmwareUpdate a PropX Pro, Motor, Outdoor, or Mini — from the app over WiFi, or from a MicroSD card — and what the green and red lights mean during an update.

Fix

TroubleshootingFix the most common PropX-Pro problems: blinking lights decoded, props that won't fire, pairing and PIN failures, WiFi, sound, LED strips, DMX, and updates.What are the lights doing?Decode the status lights first — most problems announce themselves there.

Reference

SpecsFull PropX-Pro spec table: 9–24 V DC input, 8 outputs at 1.5 A, stereo 76 W audio, DMX 512, PropX Mesh, WiFi and Bluetooth, dimensions and more.FAQReal answers for PropX-Pro owners: works without internet, using your own power supply, props over 1.5 amps, one speaker or two, SD cards, and moving computers.

Full manual (PDF) — coming soon