Any brushed DC motor that matches your power supply's voltage and stays under the current limit — 6 amps out of the box, adjustable in the app. The motor terminals drive at your supply voltage (9–24 V), so pick the supply to match the motor.
Wire a home switch to PARK and end your show with a "return to start" move — the motor stops the instant the switch closes.
The current limit cuts motor power, retries, and locks the motor off if the jam persists. Clear the jam and re-enable in the app.
Yes — enable dial control in the app and use the Speed knob: center off, FWD/REV either side, further is faster.
Yes — two output pairs, 1.5 amps each. Bigger loads via an external relay.
Either — 65 watts total, R/L stereo or one bridged speaker, 4–8 Ω.
MP3 files up to 32 MB, on a MicroSD card or uploaded from the app.
Remove it from the old computer's app first, then put the controller back in pairing mode (hold Record + Output 1 for 5 seconds until the light flashes purple) — see pairing.
No — use the PropX-Outdoor for wet locations.
Yes — DMX (512 channels) or PropX Mesh through the PROG ports, one at a time.
Coming soon. Today: the PropX Control Center desktop app.